If a load needs two cycles, the dryer is not getting weak. The vent is packed. Lint builds along the whole run from the back of the machine to the hood outside, and it builds worst at the elbows, where the air has to turn. Once that restriction is there the dryer runs longer and hotter trying to push moisture through a pipe that is half closed.
The part people underestimate is what that lint actually is. It is fuel, and it is sitting in the hottest airflow in the house. Dryers are one of the most common causes of residential fires in this country, and a choked vent is the reason more often than the machine itself.
The quickest check you can do yourself: run the dryer and go outside to the hood. If the flap barely lifts, or you feel warm damp air with no force behind it, the line is loaded.
Signs your equipment needs this
- Clothes are still damp after a full cycle, or need a second run
- The dryer or the laundry room gets unusually hot while running
- You notice a burning or hot-lint smell during a cycle
- The outside vent hood barely puffs air, or its flap does not open
- It has been more than a year since the vent was last cleaned
What the technician actually does
- We pull the dryer out and disconnect the transition duct so the full run is accessible.
- A rotary brush is run through the entire vent line from inside, breaking loose packed lint along every foot.
- The debris is vacuumed out as it comes free — it does not get pushed further down the pipe or blown into the room.
- The exterior hood and its flap are cleared and checked so they actually open under airflow.
- Everything is reconnected and we run the dryer to confirm strong flow at the outside hood.
Pick your day and time, confirm with a deposit, and you get the confirmation right away. No phone tag, no waiting on a callback, no estimate visit.
Book Dryer Vent Cleaning — $169
Frequently asked questions
How often should a dryer vent be cleaned?
Once a year for a typical household. More often with a large family, with pets, or if your vent run is long or has several elbows — every turn collects lint faster.
Why is this one flat price with no levels?
Because the job is the job: the full line gets cleaned end to end. There is no lighter version worth selling — a partial vent cleaning is not a vent cleaning.
Will this really shorten my drying time?
When the vent is the restriction, yes, and usually noticeably. You are also reducing wear on the dryer, because the machine stops running long overheated cycles.
Do you handle roof or long vent runs?
Standard single-family vent runs are covered by the posted price. If your vent exits through the roof or runs unusually long, call or text us first so we quote it properly instead of surprising you on the day.
Is a clean vent really a fire safety issue?
Yes. Lint is extremely flammable and it collects exactly where the heat is. It is one of the cheapest pieces of fire prevention in a house, and it takes us about an hour.
My dryer is fairly new — do I still need this?
The age of the dryer has nothing to do with it. What fills up is the vent line in your walls, and that has been collecting lint since the day the house was built. A brand new dryer venting into a packed pipe will still take two cycles to dry a load.
Can I just clean it from the outside with a leaf blower?
That moves the loose lint at the end of the run and leaves the packed layer that is actually causing the restriction, usually around the elbows. It also tends to push debris further into the line. A rotary brush run through the whole length is what breaks it loose, and we vacuum it out as it comes free instead of blowing it into the room.
Where we work
Equipment down right now, or something bigger than standard?
Call or text and we will take care of it.